Nouvelles de l'industrie

How to clean solar street lights?

Просмотры : 318

автор : Shenzhen Crown Lighting

Время обновления : 2021-06-25 14:43:00

How to clean solar street lights?

Nowadays, energy saving and emission reduction has become a social consensus, and LED solar supply street lights are gradually replacing traditional street lights, not only because solar street lights are more energy-efficient than traditional street lights, but also because they have more advantages in use and can meet the needs of users. So how to clean smart solar LED street light? The following is a detailed introduction for everyone.

1. It is normal for the all-in-one solar powered street lights to be used outdoors after wind, sun, rain and rain. The natural environment of the lamp body causes dust to fall on the lamp body. When the lamp body needs to be cleaned in the dusty place, only need to wet the cloth with water and wring it dry. Just wipe, keep the same direction, do not rub back and forth, the intensity should be moderate, especially the light source module should be gentle, never wash with hard objects or corrosive solvents.

2. Because the solar led street lights battery panel is exposed to the outside for a long time, it will accumulate dust. When the dust accumulates, it will have a certain impact on the solar panel's absorption of sunlight. Once the solar panel surface has a shading surface, a string of cells will be easily formed. Short-circuit, but under normal circumstances, solar led lighting street lights do not need to be cleaned. When it rains, rainwater can effectively wash away the stains or dust on the surface of the lamp body and the battery panel. If it does not rain for a long time, it is recommended to need manual cleaning for about half a year, especially Solar panel surface.

3. If the traffic volume on the road where the street light solar led is located is relatively large, the maintenance personnel should often check the battery pack and solar panel. Due to the high traffic volume on the road, there will be a lot of dust in the air. It will cause a lot of dust to accumulate on the battery panel and the light source module, so it is necessary to clean regularly, otherwise the long-term accumulation of dust will cause the light of the light source module to fail to illuminate the road normally and the solar panel to charge the battery pack, which will affect the lamp normal operation. And it also has a very large impact on the service life of the battery, and it may directly cause damage to the battery pack.

Предыдущий : Function introduction of integrated solar street light source module

Следующий : The future development trend of solar street lights

Взаимосвязанные продукты

Светодиодные прожекторы серии ARF, внесены в список UL/cUL/DLC 5.1/TUV, 50–500 Вт, гарантия 5–10 лет, 100–480 В переменного тока, 140–160 лм/Вт

► Сертификация UL/cUL/FCC/CE/RoHS
► Дополнение 5.1 Премиум
► 0–10 В с регулируемой яркостью / датчик фотоэлемента (дополнительно)
► 500–500 Вт, 140–160 лм/Вт
► IP65, гарантия 5-10 лет

10W-60W SMD LED Down Light 110-150lm/w 5 лет гарантии 2700K-6500K 200-240VAC

► Без мерцания
► Доступен индивидуальный сервис
► Одна светодиодная лампа, четыре способа установки
► Уникальная форма CrowndaLED

25W-320W FCC CE одобрил светодиодные уличные фонари серии S7 (B)

► Высокая эффективность: 130 лм/Вт, 150 лм/Вт и 170 лм/Вт.
► Антибликовый поликарбонатный объектив. Опциональный угол луча: 60°/90°/120°/T2M/T3M/T4M.
► 0–10 В с регулируемой яркостью / контроль времени / датчик освещенности / контроль лота

Helen Helen Helen

Helen

Оставьте сообщение

публикация